Live responseA real dispatcher, day or night
Your local team, ready to respond
Water Heater Repair
in Katy, Texas
Water Heater Repair Katy TX homeowners call first when the tank starts leaking, the pilot keeps dying, or the shower runs cold. We diagnose gas, electric, tankless, and heat pump units across Katy and Waller County, carry the parts, and get your hot water running again. Call (281) 326-6032.
- 24/7 live dispatch
- Residential & commercial
- Options before work
✓
Current responseCrews routing now
Start here
What can we help with?
No obligation. A local dispatcher confirms the next available window.
Thanks — your request is in. Dispatch will contact you shortly.
Licensed teamQualified, insured technicians
Clear optionsScope and price before work
Clean finishProtect, repair, test, tidy
Work backedWritten workmanship promise
The local standard
Water Heater Repair Katy TX Done by Licensed Plumbers
We are a Katy-based plumbing crew that does one thing well: water heater repair. Gas, electric, tankless, heat pump, residential and light commercial. Our techs hold state-licensed plumbing credentials and EPA Section 608 certification, so refrigerant and combustion work gets handled correctly the first time. If your tank is leaking, popping, or refusing to heat, we find the fault and fix it.
What separates us is the truck stock. We carry Rheem, A.O. Smith, and Bradford White elements, thermocouples, and T&P relief valves so most repairs finish in one visit. We run calls through Cinco Ranch, Seven Meadows, and Falcon Landing daily. When you search for water heater repair near me in Katy, you want a crew that shows up with the right part, not a promise to come back next week.
Complete service support
Water Heater Services We Handle in Katy
Every call starts with a real diagnosis, not a guess. We test the thermocouple, check the heating element with a multimeter, and inspect the anode rod before we quote anything. Whether you need 24/7 water heater repair Katy TX or a scheduled tankless descaling, we handle the full scope for homes across Katy, Fulshear, and Richmond.
01!Urgent response
Leaking Tank Repair
A puddle under the tank usually means a failed T&P relief valve, a loose flex connector, or a cracked fitting. We pressure-test the tank, replace the valve or dielectric union, and dry the pan before we leave. If the shell itself is corroded, we tell you straight and quote a replacement.
Explore Leaking Tank Repair
02↯Restore flow
Tankless Flush and Descaling
Katy water runs hard, and scale kills tankless units fast. We run a descaling pump with food-grade descaling solution through the heat exchanger, clear the inlet filter, and check flow rate after. Annual flushes keep Navien, Rinnai, and Noritz units running at full capacity instead of tripping error codes.
Explore Tankless Flush and Descaling
03♨Reliable service
Tankless Unit Repair
No hot water from a tankless heater is often a dirty flame sensor, a stuck flow sensor, or a blocked vent. We test gas pressure with a gauge, clean the burner assembly, and verify the unit fires on every fixture. Bosch, Takagi, and State tankless models are all on our truck list.
Explore Tankless Unit Repair
04⚑Trusted repairs
No Hot Water Diagnosis
Cold showers send people searching for hot water heater repair Katy open now. We check the breaker, the gas valve, the pilot, and the dip tube in one visit. Most no-hot-water calls trace back to a tripped element, a failed thermocouple, or a thermostat that reads the wrong temperature.
Explore No Hot Water Diagnosis
05!Urgent response
Not Heating Troubleshooting
When the tank is warm but never hot, sediment buildup or a burned-out lower element is usually the cause. We pull the element with an element wrench, test resistance, and flush the tank. You get a real temperature reading at the tap before we pack up.
Explore Not Heating Troubleshooting06↯Restore flow
Electric Element and Thermostat Replacement
Electric heaters fail at the element or the thermostat nine times out of ten. We isolate the circuit, test with a multimeter, and swap the failed part with an OEM replacement. American Standard and Rheem elements stay on the truck so the job finishes same-day.
Explore Electric Element and Thermostat Replacement
07♨Reliable service
Pilot Light and Thermocouple Repair
A pilot that goes out every few days is a thermocouple or draft problem, not bad luck. We test the thermocouple with a tester, check the venting against code, and replace the assembly when it fails. Gas work follows Uniform Plumbing Code and ANSI Z21.10.1 standards.
Explore Pilot Light and Thermocouple Repair
08⚑Trusted repairs
Tank Replacement
When the tank shell is corroded or the bottom is weeping rust, replacement beats repair. We haul out the old unit, set the new one on a fresh pan, install a new expansion tank and flex connectors, and pull the permit. Most swaps finish in three to four hours.
Explore Tank Replacement
09!Urgent response
Heat Pump Unit Installation
Heat pump water heaters cut electric bills but need airflow and condensate drainage done right. We size the unit for your household, set the drain line, and wire the circuit to spec. Installations in Sunterra and Elyson get checked against local code before we sign off.
Explore Heat Pump Unit Installation
10↯Restore flow
Anode Rod and Tank Flush Maintenance
The anode rod sacrifices itself so your tank does not rust through. We pull the rod, inspect it, and replace it when it is eaten past halfway. A full tank flush removes sediment that shortens element life, and it is the cheapest way to add years to a heater.
Explore Anode Rod and Tank Flush Maintenance
Not sure which category fits? Tell us what you see, hear, or smell and we'll route the right technician.
Describe the problemWhy homeowners choose us
Why Katy Homeowners Call Us for Water Heater Repair
Plenty of plumbers will take a water heater call. Fewer carry the parts, the test gear, and the code knowledge to finish it in one trip. Here is what you actually get when our truck pulls into your driveway.
4.9Average local rating across hundreds of customer reviews
From call to all clear
How Our Water Heater Repair Process Works
You always know what happens next, what needs your approval, and how we confirm the repair worked.
Call and Triage
You call (281) 326-6032 and describe the symptom: no hot water, leaking tank, popping noise. We ask the right questions up front, give you a two-hour arrival window, and text when the tech is on the way.
On-Site Diagnosis
The tech tests the thermocouple, checks voltage at the element with a multimeter, and inspects the anode rod and T&P valve. You get a plain-English explanation of what failed and what it costs to fix.
Repair or Replace
Most repairs finish in one to three hours with parts from the truck. If the tank shell is corroded, we quote a replacement on the spot and schedule it, usually within 48 hours.
Test and Walkthrough
We refill, purge air from the tank, and check temperature at the nearest faucet. You see the reading before we leave. The invoice includes the workmanship warranty terms in writing.
Built around the property
Residential care. Commercial coordination.
The principles stay the same, but access, scheduling, documentation, and load change with the property.
Residential service
Practical repairs for occupied homes, rentals, condos, and HOA-managed properties.
- Flexible windows around family schedules
- Floor and work-area protection
- Repair versus replacement guidance
- Documentation for owners and property managers
Commercial service
Response plans for restaurants, retail, offices, multifamily buildings, and light industrial sites.
- Priority scheduling and after-hours coordination
- Phased work to limit business interruption
- Site contacts, access notes, and photo records
- Preventive and multi-location service plans
Start with what you notice
Common Water Heater Problems We Fix in Katy
Most calls we run in Katy fall into a handful of categories. Here is what goes wrong, why it happens in this area, and how we fix it without selling you a new heater you do not need.
Puddle under the tank and water spreading across the garage floor
We shut the supply, drain the tank, and trace the leak to the T&P relief valve, drain valve, or a failed flex connector. Nine times out of ten the tank itself is fine and a $15 part plus labor solves it. If the shell is cracked, we say so and quote replacement.
Shower runs cold and the breaker keeps tripping
A tripped breaker plus no hot water usually means a grounded heating element. We isolate the circuit, test with a multimeter, and replace the element with an OEM part. You get hot water back the same visit, usually inside two hours.
Pilot light goes out overnight and the tank never heats
That is a thermocouple or venting issue, not a gas supply problem. We test the thermocouple, check the draft hood and vent pipe against code, and replace the assembly when it fails. Gas work follows ANSI Z21.10.1.
Popping and rumbling sounds coming from the tank
Sediment has built up on the bottom of the tank and the burner is boiling water through it. A full flush with a water heater flush kit clears it out. In hard-water neighborhoods like Cinco Ranch, we recommend a flush every 12 months.
Real local feedback
What Katy Customers Say About Our Work
★★★★★
“Our tank started leaking on a Friday night before a family reunion. I called at 7 a.m. Saturday and a tech was here by 9:30. Turned out to be the T&P valve, not the tank. $210 out the door and we had hot water for 14 guests. Honest diagnosis, no upsell.”
★★★★★
“Pilot kept going out on our A.O. Smith gas heater. Two other companies told me I needed a whole new unit. These guys tested the thermocouple, replaced it for $180, and it has run fine for months. Saved me about $1,400.”
★★★★★
“Tankless unit in our new build kept throwing an error code. They flushed it with a descaling pump, cleaned the filter, and showed me the flow reading after. Took about 90 minutes. I have them on an annual flush now.”
The whole local area
Water Heater Repair Across Katy and Nearby Areas
Our trucks cover Katy proper and the surrounding communities, from Cinco Ranch out to Brookshire and down toward Sugar Land. We work in ZIP codes 77493, 77494, and 77491, plus parts of Waller County. If you are in one of the neighborhoods below, we are already in your area most days.
Check my address →
1234
Primary dispatch zoneSame-day response depends on current call volume, technician availability, and required equipment.
How every visit runs
Prepared for the repair behind the repair.
One standard, whatever the job turns out to be — from the first call to the final test.
Prepared arrival
The right equipment is on the truck before we reach your door — matched to the symptom you reported.
Diagnosis first
We confirm the real cause before any tool goes in — so you fix the problem, not the symptom.
Contained work
Floor protection, a tidy work area, and a careful cleanup on every visit.
Tested & documented
The result is re-tested and reviewed with you, with clear notes on what comes next.
Questions before we arrive
Water Heater Repair Katy TX Questions, Answered
Still unsure? A dispatcher can help identify the safest immediate step and the right appointment type.
Ask dispatch nowHow much does water heater repair cost in Katy TX?
Most repairs in Katy run $180 to $650 in 2026, with a $89 diagnostic that gets credited toward the work. A thermocouple or T&P valve swap sits at the low end. Element and thermostat replacement lands in the middle. Tank replacement starts around $1,150 and climbs with capacity and fuel type. You get the flat-rate price before we start.
Who is the best water heater repair company in Katy?
The best company is the one that carries the parts, holds a state plumbing license, and gives you a written price before starting. We stock Rheem, A.O. Smith, and Bradford White components on every truck, which is why most of our Katy calls finish in one visit. Ask any company for their license and warranty terms before you book.
Do you offer emergency hot water heater repair near me in Katy?
Yes. We run emergency calls for no hot water, active leaks, and gas smells. Call (281) 326-6032 and we will give you the next available window, often same-day. If water is actively pooling, shut off the supply valve at the top of the tank and the gas valve or breaker before we arrive.
How do I choose a water heater repair service in Katy Texas?
Check three things: a current state plumbing license, EPA Section 608 certification if the unit uses refrigerant, and a flat-rate quote given before work begins. Ask whether they pull permits on replacements, because Katy and Waller County require it. A company that carries truck stock will finish faster than one ordering parts.
Does Katy TX have 24 hour water heater repair?
We answer the phone around the clock and dispatch emergency calls for active leaks and no-hot-water situations. Standard repair windows run 8 a.m. to 6 p.m. weekdays, with weekend coverage. After-hours calls carry a dispatch fee that we tell you about before anyone rolls a truck.
A problem does not improve with waiting
Need Water Heater Repair Katy TX Today?
Cold shower, leaking tank, or a pilot that will not stay lit? Call (281) 326-6032 now. We give you a real arrival window, a flat-rate price before we start, and a workmanship warranty on every repair.
Talk with the local team
Call Us for Water Heater Repair in Katy
Phone is the fastest way to reach us. Call (281) 326-6032 and you will talk to a person who knows water heaters, not a call center. We answer 24/7 for emergencies and schedule standard repairs Monday through Friday, 8 a.m. to 6 p.m. Most calls in Katy get a same-day window.